Tube

VSH MultiPress

K7140 VSH UltraPress multilayer tube

K7140 VSH UltraPress multilayer tube

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) ex VAT
16x2.0K714020008711985272321£3.72 per Metre
16x2.0K714010008711985304886£3.72 per Metre
20x2.0K714010008711985272338£5.97 per Metre
25x2.5K71405008711985272345£8.62 per Metre
32x3.0K71405008711985272352£12.94 per Metre
40x3.5K71402508711985272369£17.78 per Metre
32x3.0K714055008711985272406£17.35 per Metre
40x3.5K714055008711985272413£22.59 per Metre
50x4.0K714051508711985364965£53.31 per Metre
63x4.5K7140508711985364972£91.39 per Metre
CodeDescriptiond1d2DN1DN2
3840012VSH UltraPress ML tube 16x2.0 coil 200m1616DN12DN12
3840021VSH UltraPress ML tube 16x2.0 coil 100m1616DN12DN12
3840034VSH UltraPress ML tube 20x2.0 coil 100m2020DN15DN15
3840045VSH UltraPress ML tube 25x2.5 coil 50m2525DN20DN20
3840056VSH UltraPress ML tube 32x3.0 coil 50m3232DN25DN25
3840067VSH UltraPress ML tube 40x3.5 coil 25m4040DN32DN32
3840254VSH UltraPress ML tube 32x3.0 length 5m3232DN25DN25
3840265VSH UltraPress ML tube 40x3.5 length 5m4040DN32DN32
3840287VSH UltraPress ML tube 50x4.0 length 5m5050DN40DN40
3840298VSH UltraPress ML tube 63x4.5 length 5m6363DN50DN50
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
16x2.0K714038400120.1325.800.00
16x2.0K714038400210.1312.900.00
20x2.0K714038400340.1817.500.00
25x2.5K714038400450.2713.700.00
32x3.0K714038400560.3718.250.00
40x3.5K714038400670.8020.000.00
32x3.0K714038402540.371.8318.25
40x3.5K714038402650.512.5525.50
50x4.0K714038402870.894.4313.28
63x4.5K714038402981.276.330.00

Valves and Fittings

Pegler Customcare 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.

SizePattern No.CodeVSH MultiPress WRAS 16-63mm
16x2.0K71403840012approved by VSH MultiPress WRAS 16-63mm
16x2.0K71403840021approved by VSH MultiPress WRAS 16-63mm
20x2.0K71403840034approved by VSH MultiPress WRAS 16-63mm
25x2.5K71403840045approved by VSH MultiPress WRAS 16-63mm
32x3.0K71403840056approved by VSH MultiPress WRAS 16-63mm
40x3.5K71403840067approved by VSH MultiPress WRAS 16-63mm
32x3.0K71403840254approved by VSH MultiPress WRAS 16-63mm
40x3.5K71403840265approved by VSH MultiPress WRAS 16-63mm
50x4.0K71403840287approved by VSH MultiPress WRAS 16-63mm
63x4.5K71403840298approved by VSH MultiPress WRAS 16-63mm
TypeMinMax
Fittings-20˚C at 10 bar70˚C at 10 bar
Tube-20˚C at 10 bar70˚C at 10 bar
Note
LBP functionality in diameter range up to (and including) 32 mm fittings are compatable with compressed air. However please adhere guidelines, requirements and safety regarding maximum pressure when testing.
Installations should be carried out in compliance with Building Regulations Part L (England & Wales). It is the responsibility of the architect and/or the builder to ensure that the insulation is adequate for the requirements of the system and in accordance Building Regulations.

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Guarantee / Warranty

Approvals

Pressure & Temperature

Installation Instructions

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries