| Size | Pattern No. | Pack 1 Qty | Pack 2 Qty | Code | Barcode | Price (£) ex VAT | ||
|---|---|---|---|---|---|---|---|---|
| 16x2 red | K7150 | 50 | 0 | 3841222 | 8711985272505 | £8.88 per Metre | ||
| 16x2 blue | K7150 | 50 | 0 | 3841233 | 8711985272512 | £8.88 per Metre | ||
| 20x2 red | K7150 | 50 | 0 | 3841266 | 8711985272529 | £11.72 per Metre | ||
| 20x2 blue | K7150 | 50 | 0 | 3841277 | 8711985272536 | £11.72 per Metre | ||
| 25x2.5 red | K7150 | 25 | 0 | 3841288 | 8711985272543 | £18.35 per Metre | ||
| 25x2.5 blue | K7150 | 25 | 0 | 3841299 | 8711985272550 | £18.35 per Metre | ||
| 32x3 red | K7150 | 50 | 0 | 3841321 | 8711985463644 | Disc(Out of Stock) | Discontinued | 08/02/2025 |
| 32x3 blue | K7150 | 50 | 0 | 3841332 | 8711985463668 | Disc(Out of Stock) | Discontinued | 08/02/2025 |
Tube
K7150 VSH UltraPress Multilayer tube with 6mm insulation
K7150 VSH UltraPress Multilayer tube with 6mm insulation
| Code | Description | d1 | D1 | d2 | D2 | DN1 | DN2 |
|---|---|---|---|---|---|---|---|
| 3841222 | VSH UltraPress ML tube with 6mm isolation 16x2.0 (red) coil 50m | 16 | 28 | 16 | 28 | DN12 | DN12 |
| 3841233 | VSH UltraPress ML tube with 6mm isolation 16x2.0 (blue) coil 50m | 16 | 28 | 16 | 28 | DN12 | DN12 |
| 3841266 | VSH UltraPress ML tube with 6mm isolation 20x2.0 (red) coil 50m | 20 | 32 | 20 | 32 | DN15 | DN15 |
| 3841277 | VSH UltraPress ML tube with 6mm isolation 20x2.0 (blue) coil 50m | 20 | 32 | 20 | 32 | DN15 | DN15 |
| 3841288 | VSH UltraPress ML tube with 6mm isolation 25x2.5 (red) coil 25m | 25 | 37 | 25 | 37 | DN20 | DN20 |
| 3841299 | VSH UltraPress ML tube with 6mm isolation 25x2.5 (blue) coil 25m | 25 | 37 | 25 | 37 | DN20 | DN20 |
Pegler Yorkshire reserve the right to change specifications
| Size | Pattern No. | Code | Individual Weight (kg) | Pack 1 Weight (kg) | Pack 2 Weight (kg) |
|---|---|---|---|---|---|
| 16x2 red | K7150 | 3841222 | 0.13 | 6.45 | 0.00 |
| 16x2 blue | K7150 | 3841233 | 0.13 | 6.45 | 0.00 |
| 20x2 red | K7150 | 3841266 | 0.18 | 8.75 | 0.00 |
| 20x2 blue | K7150 | 3841277 | 0.18 | 18.75 | 0.00 |
| 25x2.5 red | K7150 | 3841288 | 0.27 | 6.85 | 0.00 |
| 25x2.5 blue | K7150 | 3841299 | 0.27 | 6.85 | 0.00 |
Valves and Fittings
Pegler Customcare 5 Year Guarantee - Terms and Conditions
Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.
The guarantee is subject to proof of purchase being supplied.
This guarantee does not affect any statutory rights the consumer may have in law.
The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.
This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.
The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.
This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.
Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.
Abusive behaviour and accidental damage to the product are not covered by this guarantee.
The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.
VSH MultiPress WRAS 16-63mm 
[829.5k]
| Size | Pattern No. | Code | VSH MultiPress WRAS 16-63mm |
|---|---|---|---|
| 16x2 red | K7150 | 3841222 |  |
| 16x2 blue | K7150 | 3841233 | |
| 20x2 red | K7150 | 3841266 | |
| 20x2 blue | K7150 | 3841277 | |
| 25x2.5 red | K7150 | 3841288 | |
| 25x2.5 blue | K7150 | 3841299 | |
| Type | Min | Max |
|---|---|---|
| Fittings | -20˚C at 10 bar | 70˚C at 10 bar |
| Tube | -20˚C at 10 bar | 70˚C at 10 bar |
| Note |
|---|
| LBP functionality in diameter range up to (and including) 32 mm fittings are compatable with compressed air. However please adhere guidelines, requirements and safety regarding maximum pressure when testing. |
| Installations should be carried out in compliance with Building Regulations Part L (England & Wales). It is the responsibility of the architect and/or the builder to ensure that the insulation is adequate for the requirements of the system and in accordance Building Regulations. |
Included in your data sheet will be: (Please uncheck the details not required)
General Information
Dimensions
Guarantee / Warranty
Approvals
Pressure & Temperature
Installation Instructions
